電磁盤用整流脫磁控制器Rectified and demagnetized controller for magnet board
永久磁鐵夾盤/電磁鐵夾盤Permanent magnet clamp/magnet clamp
磁石應用工具Magnet application tools
永電式方陣列磁盤 Permanent Electro Magnetic Chuck
隧道型消磁器Tunnel-Typed Demagnetizer
產品總覽


.
微距型永久磁鐵夾盤

Micropitch Permanent Magngtic Chuck
MODEL : SG.E
用途 :
新型薄形夾盤,厚度50mm,在研磨及放電加工上無論薄的或小工物件都能有效發揮吸著力。其特色夾盤面有效磁區面積擴大。
.
  特色 :
重量輕,厚度薄,適合多種用途。
此微距型夾盤有良好磁距設計,非常適合於小型及薄的工作物件。
磁鐵開關採內六角以手把on off轉換操作抽取容易,角度180度。
夾盤面比其他類似之夾盤有較寬大的有效磁性範圍。
.
  APPLICATION
New type of think chuck, in 50mm thickness, for grinding and electrodischarging works, for thin plate or small works, in wide range of applications, It features a wide effective magnetic area on the face plate (chucking face).
.
  FEATURES
Thin and light to meet versatle applications.
Fine-pitched magnetic poles, on this micropitch model, make it ideally suitable for small and thin works.
Hexagonal wench key is used for the magnetic ON/OFF changeover handle. It is inserted through the side, easily removed and operates quite lightly.
The chuck surgace has a wider effective magnetic area than other chucks of similar type.
形式
Model
尺寸
Dimension
吸盤作業面
Chucking Size
磁極間隔
Pole Pitch
吸盤基準面
Chuck Mounting Face
高度
Height
六角孔
Hexaohal Handle Hole
重量
Weight
A B C D P A E F H G N.W.
SG-1018E 100x175 100 175 146 27 2.5(1+1.5) 100 185 15 57 8 6kg
SG-1585E 150x150 150 150 116 27 2.5(1+1.5) 150 162 15 57 8 7kg
SG-1530E 150x300 150 300 256 27 2.5(1+1.5) 150 318 15   8 14kg
SG-1535E 150x350 150 350 306 1 2.5(1+1.5) 150 368 15   8 17kg
SG-1545E 150x450 150 450 406 1 2.5(1+1.5) 150 468 15   8 23kg
SG-2040E 200x400 200 400 356 27 2.5(1+1.5) 200 416 15   8 26kg
SG-2045E 200x450 200 450 406 1 2.5(1+1.5) 200 416 15   8 29kg
SG-2550E 250x500 250 500 460 1 2.5(1+1.5) 250 510 15 57 8  
==================================================================================================


.
標準永久磁鐵夾盤
Standare Pole Permanent Magngtic Chuck
MODEL : SG.W
用途 :
最適合研削作業之標準型永磁夾盤。
  特色 :
磁盤開關採用六角孔手把。
轉換操作,角度180度。
.
  APPLICATION
Most suitable for gninding operation, of standard permanent magn chuck.
  FEATURES
Hexagonal wench key is used for the magnetic ON/OFF changeover handle. It is inserted through the side, easily removed and operates quite lightly.
形式
Model
尺寸
Dimension
吸盤作業面
Chucking Size
磁極間隔
Pole Pitch
吸盤基準面
Chuck Mounting Face
高度
Height
重量
Weight
A B C D P G E F H N.W.
SG-1017W 100x175 100 175 143 22

8(2+6)

96 187 15 57 5kg
SG-1025W 100x250 100 250 202 22 8(2+6) 96 262 15 57 7kg
SG-1325W 125x250 125 250 202 22 8(2+6) 121 262 15 57 9kg
SG-1530W 150x300 150 300 255 22 8(2+6) 146 312 15 57 13kg
SG-1535W 150x350 150 350 299 22 8(2+6) 146 362 15 57 15kg
SG-1545W 150x450 150 450 409 22 8(2+6) 146 462 15 57 19kg
SG-2040W 200x400 200 400 365 22 8(2+6) 196 412 15 57 23kg
SG-2045W 200x450 200 450 409 22 8(2+6) 196 462 15 57 26kg
SG-2550W 250x500 250 500 460 22 8(2+6)   510 15 57  
==================================================================================================


.
標準電磁鐵夾盤
Standare Pole Electromahnetic Chuck
MODEL : SG.C
用途 :
最適合研削作業之標準型永磁夾盤。
.
  特色 :
結構精,密度高。
.
  APPLICATION
Most suitable for gninding operation, of standard electromahnetic chuck.
形式
Model
尺寸
Dimension
吸盤作業面
Chucking Size
磁極間隔
Pole Pitch
吸盤基準面
Chuck Mounting Face
電壓
Voltage
電流
Current
重量
Weight
A B C D P G E F H N.W.
SG-1530C 150x300 150 300 228 22

15(3+12)

144 316 20 70 Dc90V 0.15A 21kg
SG-1535C 150x350 150 350 288 22 15(3+12) 144 366 20 70 Dc90V 0.18A 25kg
SG-1545C 150x450 150 450 378 22 15(3+12) 144 466 20 70 Dc90V 0.24A 32kg
SG-2040C 200x400 200 400 348 22 15(3+12) 194 416 20 70 Dc90V 0.47A 38kg
SG-2045C 200x450 200 450 378 22 15(3+12) 194 466 20 70 Dc90V 0.35A 43kg
SG-2550C 250x500 250 500 438 22 15(3+12) 240 500 20 70 Dc90V 0.73A 67kg
SG-3060C 300x600 300 600 529 22 15(3+12) 290 600 20 70 Dc90V 0.97A 97kg
SG-4080C 400x800 400 800 725 22 15(3+12) 390 800 20 80 Dc90V 1.56A 182kg
SG-40100C 400x1000 400 1000 936 22 15(3+12) 390 1000 20 80 Dc90V 1.60A 228kg 
SG-50100C 500x1000 500 1000 936 22 15(3+12) 490 1000 20 80 Dc90V 1.72A 285kg
SG-120150C 1200x1500 1200 1500 1438 27 15(3+12)   1500 20 90 Dc90V    
==================================================================================================


.
微距型永久磁鐵夾盤

Micropitch Permanent Magngtic Chuck
MODEL : SG.L
用途 :
最適合研磨與切削薄的工作,被加工物件應超過40m/m長度且應放置與銅條垂直之方向加工,用途廣。
.
  特色 :
對於較小及薄的加工物,以微距型永磁夾盤為最適用,請參照SG.E型。
.
  APPLICATION
Most suitable for grinding and cutting thin works the works should have length exceeding 40mm and be attracted in lengthy direction.
.
  FEATURES
For small and thin works the micropitch permanent magnetic model DMW-A is most useful.
Beside the grinding of thin works which meet the above condition the chuck is also efficient for cutting operation.
形式
Model
尺寸
Dimension
吸盤作業面
Chucking Size
磁極間隔
Pole Pitch
吸盤基準面
Chuck Mounting Face
電壓
Voltage
電流
Current
重量
Weight
A B C D P G E F H N.W.
SG-1530L 150x300 150 300 245 27

4(1+3)

146 300 20 100 Dc90V 0.83A 34kg
SG-1535L 150x350 150 350 293 27 4(1+3) 146 350 20 100 Dc90V 0.69A 39kg
SG-1545L 150x450 150 450 393 27 4(1+3) 146 450 20 100 Dc90V 0.66A 50kg
SG-2040L 200x400 200 400 345 27 4(1+3) 196 400 20 100 Dc90V 0.80A 59kg
SG-2045L 200x450 200 450 393 27 4(1+3) 196 450 20 100 Dc90V 0.70A 67kg
SG-2550L 200x500 200 500 445 27 4(1+3) 196 500 20 100 Dc90V 0.70A 76kg
SG-2060L 200x600 200 600 545 27 4(1+3) 196 600 20 100 Dc90V 0.64A 87kg
SG-2550L 250x500 250 500 445 27 4(1+3) 246 500 20 100 Dc90V 0.97A 92kg
SG-3060L 300x600 300 600 545 27 4(1+3) 296 600 20 100 Dc90V 1.43A 135kg 
SG-3570L 350x700 500 1000 460 27 4(1+3)   1000 22 1000 Dc90V    
SG-5001000L 500x1000 500 1000 460 27 4(1+3)   1000 22 1000 Dc90V    
==================================================================================================




.
可傾式電磁鐵夾盤
Rotaryl Electromahnetic Chuck
MODEL : 粗SG.B,細SG.A
用途 :
最適合模具及各種角度之成型研磨。
.
  APPLICATION
Most suitable for mold grinding of jig, metallic mold, etc.
形式
Model
尺寸
Dimension
吸盤作業面
Chucking Size
磁極間隔
Pole Pitch
可傾台
Rotary Stand
全長
Overall Length
全高
Overall Height
電壓
Voltage
電流
Current
重量
Weight
A B C D P M N O G L Q E K N.W.
SG-1530B 150x300 150 300 240 95

(2+12)

100 50 25 14 91 18 418 145 Dc90V 0.41A 34kg
SG-1535B 150x350 150 350 296 95 (2+12) 100 50 25 14 91 18 468 145 Dc90V 0.15A 39kg
SG-1545B 150x450 150 450 408 95 (2+12) 100 50 25 14 91 18 568 145 Dc90V 0.20A 50kg
SG-15100B 150x1000 150 1000 942 95 (2+12) 100 60 25 14 91 18 1150 145 Dc90V    
==================================================================================================


.
超強力型電磁鐵夾盤
Super-Powerful
Electromahnetic Chuck
MODEL : SG.H
用途 :
對於銑床,龍門銑床,CNC銑床,鉋床作重沏削最為有效,尤其在厚的工作物及高速沏削工作時顯示其強大吸著力。
.
  APPLICATION
Most efficient for heavy cutting with milling machine, shaper, planer and planomiler. It displays the power for the thick work and the high speed cutting operation.
形式
Model
尺寸
Dimension
吸盤作業面
Chucking Size
磁極間隔
Pole Pitch
吸盤基準面
Chuck Mounting Face
電壓
Voltage
電流
Current
重量
Weight
A B C D I P1 P2 E F H N.W.
SG-2040H 200x400 200 400 332 30 154 36 23 450 20 120 Dc90V 0.71 54kg
SG-2050H 200x500 200 500 422 30 154 36 23 550 20 120 Dc90V 0.91 75kg
SG-2060H 200x600 200 600 520 30 154 36 23 650 20 120 Dc90V 1.00 80kg
SG-2550H 250x500 250 500 422 30 204 38 25 550 20 120 Dc90V 1.16 90kg
SG-3060H 300x600 300 600 520 30 254 38 25 650 20 120 Dc90V 1.63 130kg
SG-4080H 400x800 400 800 718 30 354 38 25 850 23 120 Dc90V 2.53 230kg
SG-40100H 400x1000 400 1000 917 30 354 38 25 1050 23 120 Dc90V 2.96 288kg
SG-50100H 500x1000 500 1000 917 30 454 36 25 1050 27 120 Dc90V 3.96 360kg
SG-60100H 600x1000 600 1000 917 30 554 38 25 1050 27 120 Dc90V 5.30 432kg
SG-120200H 1200x2000 1200 1200 1926 30 1154 39 26 2050 27 125 Dc90V    
星加電機工業有限公司,版權所有 © 2004 SIN GAR PERMANENT MAGETIC CHUCK, ALL RIGHTS RESERVED.
Designed by: iware網頁設計